1. Product introduction
NBS red rubber exposed roofing special product is a new generation of roofing waterproof coating made of imported rubber emulsion as base material, which is grafted with water-based epoxy resin and refined under the promotion of imported additives. It is an environmentally friendly polymer elastic waterproof material, the product is non-toxic and tasteless, with good bonding and impermeability. The mortar cement foundation surface and stone, metal products have a strong adhesion, the performance of the product is stable, can withstand long-term sunlight irradiation, excellent aging resistance, high film strength, good elasticity, excellent waterproof effect.
2. Product details
Product name: NBS Rubber Waterproof Coating
Product model: NBS-135
Product form: One-component, Emulsion
Executive standard: JC/T 864-2008
3. Product advantages
★ High temperature resistance 120ºC. Low temperature resistance -soºC
★ Strong weather resistance, waterproof performance up to 30 years
★ Strong bonding, tensile and wear-resistant
★ Strong elasticity after film formation, excellent tensile resistance
★ Ozone and other natural aging resistance, acid and alkali and other chemical corrosion resistance.
4. The scope of application
★ Suitable for roof, wall, toilet, basement and other non-long-term immersion environment, seepage prevention projects;
★ Suitable for metal roof color steel tile and other waterproof projects.
★ Suitable for the sealing of expansion joint, partition joint, water outlet, wall pipe, etc.
5. Construction technology
a. Base preparation
★Base surface treatment: the base surface requirements must be smooth, firm, clean, no water, no leakage, uneven and cracks must be levelled first, leakage must be first plugging treatment, Yin and Yang Angle should be made into an arc Angle;
b. Construction technology
★ Coating with roller or brush, according to the selected construction method, according to the bottom layer → lower coating → non-woven fabric → medium coating → top coating order to complete layer by layer;
★ Coating should be as uniform as possible, not locally deposited or too thick or too thin.
6. Matters needing attention
★ can not be constructed below 4 ° C or in the rain, do not construction in a particularly humid and unventilated environment, otherwise it will affect film formation;
★ after construction, we should carefully check all parts of the entire project, especially weak links, find problems, find out the cause and repair in time.
★ Theoretical dosage: 2kg/m when the film is coated 1mm, the actual dosage depends on the situation.
7. Reference dosage
When the thickness of the waterproof membrane is 1.0mm, the theoretical dosage is about 1.5-2.0kg/m2. The actual amount depends on the specific base surface conditions.
8. Shelf life:
Under normal storage and transportation conditions, the shelf life is two years.
9. Packaging specifications:
1) Product specifications
10kg
20kg
2) Packaging materials
Packed in plastic drums
Guangdong Huolun Building Materials Technology Development Co., Ltd. is a manufacturer engaged in the R&D, production, and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, heat insulation coating, metal anti-rust paint, and so on. The company is registered in Guangzhou, the capital city of Guangdong Province, with a registered capital of 50 million yuan. It is an industrial and research-oriented enterprise.
Since its establishment, the company has grown from a small enterprise to nearly 120 employees. It has experienced rapid growth in its annual sales volume. In 2019, it successfully became the third investor in Oriental Plastics (Guangdong) Industrial Co., Ltd. Additionally, the company owns an operation center of over 600 square meters in Kaiyun Business Center and a production plant of nearly 15,000 square meters in Guangzhou. It has also established a distribution center of over 1,000 square meters in Chengdu.
We have developed a series of waterproof products with world-class performance, all of which meet or exceed national testing standards. Furthermore, we have acquired ISO9001 and ISO14001 certifications, and possess multiple invention and utility model patents.
Adhering to the principles of quality first and service excellence, we actively collaborate with both current and new partners, seeking mutual development and a prosperous future.
FAQ
1. Q: Are You Factory Or Trading Company?
A: We are Manufacturer
2. Q: Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. We can put your Logo on product.
3. Q: About Sample?
A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.
4.Q: About Delivery Time?
A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.
5. Q:Do You Have Discount For Bulk Order?
A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get
6. Q: Do you provide Technical & Engineering Service?
A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.
){kind=link}