Nbs-802 Nano-Permeable Waterproof Agent for Floor/Wall on Concrete-Based, Moisture Protection

Product Description

NBS-802  Nano-Permeable Waterproof Agent for Floor/Wall on Concrete-Based, Moisture Protection

Guangdong Huolun Building Materials Technology Development Co., Ltd,The main products of our factory are cover waterproof coating, thermal insulation coating, soundproofing coating, metal anti-rust paint, and so on. 

Product Description

Nano-permeable waterproof agent is a transparent and colorless water-based silicone waterproofing agent. After spraying, a transparent waterproof layer is formed on the surface of porous structures such as concrete to achieve surface waterproofing; it can also be mixed with cement mortar. It's active ingredients can promote the hydration of the cement itself,increase the hydration products, and the cement crystals will become finer and the structure will be dense.Improve the impermeability of concrete.

Product advantages
1.This product is non-toxic, odorless, non-polluting, non-corrosive, convenient and quick to construct,and suitable fora variety of base surfaces Construction on the wall
2.It has good moisture-proof,anti-corrosion, anti-pollution, anti-salt precipitation and anti-weathering(anti-aging of the wall)to maintain the original color The function plays a protective role on the wall;
3.With strong permeability, waterproof and breathable, after spraying(painting)to form a waterproof film,rain or moisture can not penetrate into the moisture inside the wall, but the moisture inside the wall can still be radiated out without obstacles through the waterproof film, achieving the function of being waterproof and breathable;

The scope of application
1.Moisture-proof,anti-leakage and anti-pollution of the wall finishes of various buildings;
2.Moisture protection for gardens, stone carvings, ancient building protection, warehouses, cemeteries, granaries, archives, museums, etc;
3.Salting out of tiles, mosaics, marble, granite, etc;

Construction technology
1)There must be no looseness,oily material,and cement mortar if there are cracks.The base surface must be dry during construction
2)Spraying or brushing:Use a clean agricultural sprayer or roller brush on the dry base surface (wall surface,etc.)continuously for 2-3 times vertically and horizontally,without intermittent;
3)Add cement mortar to use:waterproof agent and water in a ratio of 1:1 to 3,then add cement and sand to mix the slurry for use,and moisten the base surface before use;

Matters needing attention
1.Rainwater shall not be invaded within24 hours after construction,and the construction shall be stopped if the temperature is below 4ºC,and the base surface must be dry during construction;
2.It is not suitable to use this product on impermeable base surface.If it is sprayed too much,white crystals will form on the surface
3.It is not recommended to mix conventional materials with water.The concentrated stock solution must be mixed with water at a ratio of 1:5-8 between the material and the water;

Reference dosage
Reference dosage:  The theoretical dosage is about 5-6m2/KG. The actual amount depends on the specific base surface conditions.

Shelf life:
Under normal storage and transportation conditions, the shelf life is two year.

Packaging specifications:
1) Product specifications
1kg
5kg 
10kg 
20kg 

2) Packaging materials
The outer packaging is in plastic drums; 


Guangdong Huolun Building Materials Technology Development Co., Ltd. is an enterprise engaged in the production and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, thermal insulation coating, soundproofing coating, metal anti-rust paint, and so on. The company is registered in Guangzhou, the capital city of Guangdong Province, with a registered capital of 50 million yuan. It is an industrial and research-oriented enterprise.

Since its establishment, the company has grown from a small enterprise to nearly 120  employees. It has experienced rapid growth in its annual sales volume. In 2019, it successfully became the third investor in Oriental Plastics (Guangdong) Industrial Co., Ltd. Additionally, the company owns an operation center of over 600 square meters in Kaiyun Business Center, and a production plant of nearly 30,000 square meters in Guangzhou. It has also established a distribution center of over 1,000 square meters in Chengdu.

In response to the rapid development of the Chinese economy, 'NBS' waterproof products are meeting the escalating demand for building materials. Following strict technical specifications, quality control, and chemical and concrete laboratory data, the company produces a series of building materials products that adapt to China's complex and changeable climate and are at the forefront internationally. It provides customers with necessary testing and perfect waterproof system solutions. 'NBS' waterproof products have been renowned for their quality and excellent service. Our products are exported to Southeast Asia and the Middle East.

Our company's 'NBS' waterproof products are tailored to meet both domestic needs and international demand, resulting in the production of high-quality, environmentally friendly products. The products cover areas such as construction materials, decoration materials, and waterproof materials. We have developed a series of waterproof products for both interior and exterior walls and provide technical services for waterproofing projects. Relying on the company's high-tech research and development, we have developed a series of waterproof products with world-class performance, all of which meet or exceed national testing standards. The company holds multiple patents for invention and utility models, possesses a second-level waterproof construction qualification, and is a national high-tech enterprise and a nurtured enterprise for small giants. It is a trusted enterprise in the waterproofing industry.

Adhering to the principles of quality first and service excellence, we actively collaborate with both current and new partners, seeking mutual development and a prosperous future.


FAQ

1. Q: Are You Factory Or Trading Company?
     A: we are Manufacturer

2. Q: Can You Make Our Design Or Put Our Logo On The Product?
    A: Yes,We support OEM&ODM. We can put your Logo on product.

3. Q: About Sample?
     A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.

4.Q: About Delivery Time?
   A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.

5. Q:Do You Have Discount For Bulk Order?
    A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get

6. Q: Do you provide Technical & Engineering Service?
    A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.