NBS Water-based Metal Anti-rust paint
1. Product introduction
The Water-based Metal Anti-rust Paint is formulated with water as the dispersion medium, using multiple anti-rust mechanisms such as physics and chemistry. It is the best replacement product for the traditional metal anti-rust paint.
2. Product details
Product name: NBS Water-based Metal Anti-rust paint
Product model: NBS-130
Product form: One-component, white emulsion
Executive standard: HG/T 4758-2014
3. Product advantages
★ Excellent environmental protection safety: non-toxic, tasteless, non-polluting, no three wastes, non-flammable and non-explosive, ensuring environmental protection and fire safety, and protecting the health of workers.
★ Excellent film durability: It has excellent resistance to salt spray, salt water, fresh water, gasoline, ultraviolet light, aging resistance, high temperature resistance, low temperature resistance, damp heat resistance, temperature change resistance, etc., and has good paint film performance.
★ Increase efficiency, energy saving and cost reduction: it can be used directly without applying primer, saving time and effort, simple and fast, and can greatly improve work efficiency. Water is used as a diluent, product utilization rate is 100%, and unit coating cost is extremely low.
4. The scope of application
★Rusty gates, fire hydrants, fire cabinets, iron plates of ships, etc.
5. Construction technology
1. Construction technology
1) This product is suitable for brushing, spraying and dipping;
2) During the construction process, the painting tool must be used alone, and must not be mixed with other paints or utensils. After use, it should be cleaned with tap water for repeated use;
3) It is suitable for storage and construction at a temperature of 5ºC to 45ºC;
4) The shelf life is subject to the label of the factory certificate;
2. Matters needing attention
★ The proportion of water and powder can be adjusted appropriately according to the different substrates, weather and construction conditions;
★ The normal setting time may fluctuate due to the difference in water consumption and construction temperature;
★ There will be a lot of heat during condensation, be careful to avoid burns;
6. Reference dosage
Reference dosage:Around 0.2kg/m2 . The actual amount depends on the specific base surface conditions.
7. Shelf life:
Under normal storage and transportation conditions, the shelf life is one year.
8. Packaging specifications:
1) Product specifications
1kg*8 one-component (paste) (can open the lid for direct construction)
2kg*8 one-component (paste) (can open the lid for direct construction)
5kg one-component (paste) (can be opened and applied directly)
18kg one-component (paste) (can be opened and applied directly)
20kg one-component (paste) (can open the lid and apply directly)
2) Packaging materials
Packed in plastic drums.
Guangdong Huolun Building Materials Technology Development Co., Ltd. is a manufacturer engaged in the R&D, production, and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, heat insulation coating, metal anti-rust paint, and so on. The company is registered in Guangzhou, the capital city of Guangdong Province, with a registered capital of 50 million yuan. It is an industrial and research-oriented enterprise.
Since its establishment, the company has grown from a small enterprise to nearly 120 employees. It has experienced rapid growth in its annual sales volume. In 2019, it successfully became the third investor in Oriental Plastics (Guangdong) Industrial Co., Ltd. Additionally, the company owns an operation center of over 600 square meters in Kaiyun Business Center and a production plant of nearly 15,000 square meters in Guangzhou. It has also established a distribution center of over 1,000 square meters in Chengdu.
We have developed a series of waterproof products with world-class performance, all of which meet or exceed national testing standards. Furthermore, we have acquired ISO9001 and ISO14001 certifications, and possess multiple invention and utility model patents.
Adhering to the principles of quality first and service excellence, we actively collaborate with both current and new partners, seeking mutual development and a prosperous future.
FAQ
1. Q: Are You Factory Or Trading Company?
A: we are Manufacturer
2. Q: Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. We can put your Logo on product.
3. Q: About Sample?
A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.
4.Q: About Delivery Time?
A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.
5. Q:Do You Have Discount For Bulk Order?
A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get
6. Q: Do you provide Technical & Engineering Service?
A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.
){kind=link}