Product introduction
Reflective heat insulation and waterproof coatings are composed of hollow microbead insulation materials with extremely low thermal conductivity, carbon nanotubes with strong electromagnetic wave shielding, and heat reflective materials such as nitrides and metal oxides, as well as radiation materials and additives. A new type of cooling paint that integrates reflection, radiation and heat insulation, and a thin-layer reflective heat insulation paint with the dual functions of decoration and heat insulation. The coating can highly reflect solar infrared and ultraviolet in the 400nm-2500nm range. When the sun is strong, it reflects about 90%-95% of all heat radiation, which is equivalent to a 10mm thick polystyrene foam with an R value of 20. The surface temperature of the object can be reduced by more than 20 ° C. The paint can radiate heat to reduce the temperature even in cloudy and night, isolate the transfer of heat energy, and ensure that the interior space of the building can maintain a permanent constant temperature state.
Product advantages
1. Building insulation application: building layer, building steel structure roof etc., painting 1-2mm;
2. The thick anti-radiation heat insulation coating can reduce the exterior temperature of the building by 20 ° C-30 ° C, and the internal temperature by 8 ° C-10 ° C, while improving the protection of the base layer, preventing metal corrosion to a certain extent, and extending service life;
3. Brushing on the inner wall of the building can prevent the generation of condensed water, prevent the wall from being mouldy and hairy, and has the functions of heat preservation and waterproofing;
The scope of application
It is suitable for new and existing concrete roofs, asphalt-based roofs, etc., especially for the maintenance and protection of metal roofs, and color steel anti-rust and heat insulation.
Construction technology
1) The base layer should be firm, no cracking, no powder, no sand, no hollowing, no oil, no peeling, no old coating with poor adhesio, cracked or uneven base surface should be filled with cement mortar Construction will be done after filling;
2) There is no rust on the metal surface. If there is rust, first paint it with " Ke Xiu Ling " products and then dry it to avoid coating delamination due to rust shedding;
3) Stir evenly after opening the lid. If there is some layering, stir evenly without affecting the use effect. You can roll brush or use professional equipment to spray;
Matters needing attention
1. This product is suitable for use in an environment of 5ºC ~ 40ºC . It must be protected from rain, hot sunlight and frost during the construction process;
2. During construction, do not mix different materials and use them. Unused materials should be sealed and used up within 15 days after opening the lid;
3. Store in a cool and dry place to prevent sunlight, freezing and moisture;
4. It is necessary to keep the subsequent drainage of the roof smooth;
Guangdong Huolun Building Materials Technology Development Co., Ltd. is an enterprise engaged in the production and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, thermal insulation coating, soundproofing coating, metal anti-rust paint, and so on. The company is registered in Guangzhou, the capital city of Guangdong Province, with a registered capital of 50 million yuan. It is an industrial and research-oriented enterprise.
Since its establishment, the company has grown from a small enterprise to nearly 120 employees. It has experienced rapid growth in its annual sales volume. In 2019, it successfully became the third investor in Oriental Plastics (Guangdong) Industrial Co., Ltd. Additionally, the company owns an operation center of over 600 square meters in Kaiyun Business Center, and a production plant of nearly 30,000 square meters in Guangzhou. It has also established a distribution center of over 1,000 square meters in Chengdu.
In response to the rapid development of the Chinese economy, 'NBS' waterproof products are meeting the escalating demand for building materials. Following strict technical specifications, quality control, and chemical and concrete laboratory data, the company produces a series of building materials products that adapt to China's complex and changeable climate and are at the forefront internationally. It provides customers with necessary testing and perfect waterproof system solutions. 'NBS' waterproof products have been renowned for their quality and excellent service. Our products are exported to Southeast Asia and the Middle East.
Our company's 'NBS' waterproof products are tailored to meet both domestic needs and international demand, resulting in the production of high-quality, environmentally friendly products. The products cover areas such as construction materials, decoration materials, and waterproof materials. We have developed a series of waterproof products for both interior and exterior walls and provide technical services for waterproofing projects. Relying on the company's high-tech research and development, we have developed a series of waterproof products with world-class performance, all of which meet or exceed national testing standards. The company holds multiple patents for invention and utility models, possesses a second-level waterproof construction qualification, and is a national high-tech enterprise and a nurtured enterprise for small giants. It is a trusted enterprise in the waterproofing industry.
Adhering to the principles of quality first and service excellence, we actively collaborate with both current and new partners, seeking mutual development and a prosperous future.
FAQ
1. Q: Are You Factory Or Trading Company?
A: we are Manufacturer
2. Q: Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. We can put your Logo on product.
3. Q: About Sample?
A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.
4.Q: About Delivery Time?
A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.
5. Q:Do You Have Discount For Bulk Order?
A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get
6. Q: Do you provide Technical & Engineering Service?
A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.
){kind=link}