1. Product introduction
This product is a high polymer waterproof emulsion formed by a specific high-performance building emulsion as a carrier and modified by various additives. This product has excellent adhesion, impermeability, crack resistance, durability and acid and alkali resistance. The product is non-toxic, non-polluting, convenient for construction, and has significant environmental benefits. It is a new generation of environmentally friendly waterproof materials.
2. Product details
Product name: NBS JS Polymer Cementious Waterproof Coating
Product model: NBS-103
Product form: One-component, Emulsion
Executive standard: GB/T 23445-2009
3. Product advantages
★ It has a certain degree of flexibility, good bonding performance, and can be constructed on a wet base surface;
★ Good weather resistance, high and low temperature resistance; less dosage, low cost, non-toxic and harmless,non-polluting, and easy to construct;
4. The scope of application
★ It is widely used in waterproof, anti-leakage and moisture-proof projects for exterior walls, toilets, baths, kitchens, swimming pools, basements, roofs and other buildings;
★ It is used to prevent leakage and moisture of porous material masonry such as aerated concrete and hollow bricks;
5. Construction technology
1. Base preparation
★The substrate must be firm, flat, clean, free of dust, greasy, wax, release agent, etc. and other debris;
★All small pores and sand holes can be mixed into a wet mass with the plugging king and a little water, and then smoothed;
★Before applying the slurry, fully moisten the substrate in advance, but there should be no stagnant water;
2. Construction technology
★ When using, add cement and stir according to the ratio of (slurry:cement=1:1), add cement sand according to the rafio of (slurry: sand is and=1:2) use a brush or roller brush to mix it directly Brush the slurry on the base surface, carefully check for missing brushes or defects. Intermittent stirring should be maintained during operation to prevent sedimentation;
★ For moisture-proof, one layer can be applied;for waterproof, at least two Iayers should be applied, The multi-layer construction method should be adopted, and the standard amount should be used for construction, and the thickness of a single layer should not exceed 1mm;
★ After the first layer is completely dry (about 2-4 hours), apply the second layer. The brushing direction of the second layer should be perpendicular to the brushing direction of the first layer;
6. Matters needing attention
★ This product is suitable for use in an environment of 5ºC~35ºC, and must be protected from rain, hot sunlight and frost during the construction process;
★ The slurry after opening and adjustment should be used up within 2 hour. Do not mix the dried glue with water before using it;
★ After the waterproof layer is completely dried, other covering layers can be used;
7. Reference dosage
When the thickness of the waterproof membrane is 1.0mm, the theoretical dosage is about 0.3-0.6kg/. The actual amount depends on the specific base surface conditions.
8. Shelf life:
Under normal storage and transportation conditions, the shelf life is two years.
9. Packaging specifications:
1) Product specifications
5kg
10kg
20kg
50kg
2) Packaging materials
The outer packaging is in plastic drums;
Guangdong Huolun Building Materials Technology Development Co., Ltd. is an enterprise engaged in the production and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, thermal insulation coating, soundproofing coating, metal anti-rust paint, and so on. The company is registered in Guangzhou, the capital city of Guangdong Province, with a registered capital of 50 million yuan. It is an industrial and research-oriented enterprise.
Since its establishment, the company has grown from a small enterprise to nearly 120 employees. It has experienced rapid growth in its annual sales volume. In 2019, it successfully became the third investor in Oriental Plastics (Guangdong) Industrial Co., Ltd. Additionally, the company owns an operation center of over 600 square meters in Kaiyun Business Center, and a production plant of nearly 30,000 square meters in Guangzhou. It has also established a distribution center of over 1,000 square meters in Chengdu.
In response to the rapid development of the Chinese economy, 'NBS' waterproof products are meeting the escalating demand for building materials. Following strict technical specifications, quality control, and chemical and concrete laboratory data, the company produces a series of building materials products that adapt to China's complex and changeable climate and are at the forefront internationally. It provides customers with necessary testing and perfect waterproof system solutions. 'NBS' waterproof products have been renowned for their quality and excellent service. Our products are exported to Southeast Asia and the Middle East.
Our company's 'NBS' waterproof products are tailored to meet both domestic needs and international demand, resulting in the production of high-quality, environmentally friendly products. The products cover areas such as construction materials, decoration materials, and waterproof materials. We have developed a series of waterproof products for both interior and exterior walls and provide technical services for waterproofing projects. Relying on the company's high-tech research and development, we have developed a series of waterproof products with world-class performance, all of which meet or exceed national testing standards. The company holds multiple patents for invention and utility models, possesses a second-level waterproof construction qualification, and is a national high-tech enterprise and a nurtured enterprise for small giants. It is a trusted enterprise in the waterproofing industry.
Adhering to the principles of quality first and service excellence, we actively collaborate with both current and new partners, seeking mutual development and a prosperous future.
FAQ
1. Q: Are You Factory Or Trading Company?
A: we are Manufacturer
2. Q: Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. We can put your Logo on product.
3. Q: About Sample?
A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.
4.Q: About Delivery Time?
A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.
5. Q:Do You Have Discount For Bulk Order?
A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get
6. Q: Do you provide Technical & Engineering Service?
A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.
){kind=link}