Nbs-309 One Component Polyurethane Waterproofing Coating for Cement Roof and Walls

Product Description

NBS-309 One Component Polyurethane Waterproofing Coating for Cement Roof and Walls

Guangdong Huolun Building Materials Technology Development Co., Ltd,The main products of our factory are cover waterproof coating, thermal insulation coating, soundproofing coating, metal anti-rust paint, and so on. 

Structural coating ,Putty Primer ,Concrete sealant , construction chemical ,construction paint  ,construction sealant  , construction coating
construction admixture  ,construction waterproof ,Waterproof Coating  ,waterproof paint , Renovation Paint , Latex Paint , waterproof membrane ,Waterproof Tape  ,Roof Waterproof ,Floor Waterproof ,wall Waterproof, basement Waterproof,  pool Waterproof  ,Waterproof Building Materials,waterborne coating ,acrylic waterproof ,polymer waterproof ,polyurethane waterproof ,polyurea waterproof,  epoxy waterproof,steel structure fireproof coating,waterproof coating manufacturer/producer/wholesaler
 

One Component Polyurethane Waterproofing Coating Oil Based
1	High elongation, good for large area waterproofing and mending leakage
2	Good bonding property, strong adhesion: be bonded with different base layers and directly
3	Easy construction,out of the box for use on-site
4	Corrosion resistance, mildew resistance
5	Weather resistance, can adapt to a variety of climate and temperature changes
6	Aging resistance, stable performance, long service life
7	Shelf life: 2 years; Use life :10-15years

 

Product Description

 

 

Product introduction
This product is made out of the main materials of is ocyanate and polyether polyol, together with various auxiliaries and fillers by polyreaction , coating on the waterproof base layer, After chemical reaction with moisture in the air, a jointless, flexible rubber waterproof layer is formed.

Product details
Product name: NBS One Component Polyurethane Waterproofing Coating Oil Based
Product form: One-component, liquid
Executive standard: GB/T 19250-2013

Product advantages
★ High tensile strength, strong resistance to the deformation of base layer (shrinkage and cracking
★ Good bonding property, strong adhesion: be bonded with different base layers and directly
★ Easy construction,out of the box for use on-site, dense coating, pinhole-free, no bubbles;
★ Water erosion resistance, corrosion resistance, mildew resistance
★ Excellent low temperature flexibility: -40 ºC low temperature bending without cracking
★ Environmental friendly, non-dangerous goods, no benzene, toluene, xylene and any other toxic solvents, no coal tar.

The scope of application
Suitable for basements (building basements, underground parking lots, open subways and tunnels);
Suitable for bathroom, balcony, parking lot, roof waterproofing;
Suitable for swimming pool, water fountain, pond, drains waterproof engineering;

Construction technology
A. Construction Process
Base preparation→detail additional waterproof layer construction→large surface painting waterproof layer construction →Head and edge sealing→Quality inspection, acceptance→protection and isolation layer construction.
Construction Point

1)  Base  cleaning:waterproofing base should be flat, solid, dry, no sharp bumps, honeycomb, pockmarked and peeling, no oil. Surface deformation, cracks, water pipe joints left in the groove, should be embedded sealing material and do additional waterproofing, flat and solid substrate without the need to apply grass-roots treatment agent.

2) Detail additional waterproofing layer construction: corners, roots of water pipes, deformation, seams and other basic detail nodes, should be additional waterproofing layer construction, can be coated 2-4 times (thickness of not less than 1mm), such as the need to sandwich pavement carcass reinforcement materials must be soaked, deformation cracks parts should be paved with an additional layer of polyester non-woven fabric, and then additional coating, the formation of additional waterproofing layer of paving the structure.

3)  Large surface coating waterproof layer construction: it is appropriate to use plastic scraper scraping construction, large surface coating is appropriate to be 2-3 times coating. When there is no base surface treatment agent, the first time should be thinly coated to close the grass-roots level pores, the last layer of coating dry on the strength of the next construction can be carried out, the general interval of 24h (low-temperature environment drying time is appropriately extended), the direction of the next course of brushing and painting direction perpendicular to the direction of the previous course, such as the need to pave the carcass reinforcing material, it should be coated with coating, paving the reinforcing material.

4) Head and edge sealing: apply additional paint for closure.

B. Construction technology
This product can be scraped or brushed.

Matters needing attention
★ The construction temperature is 5ºC-35ºC, rain and snow environment shall not be constructed.
★ Construction should be carried out under well-ventilated conditions, and construction workers should take appropriate safety measures.
★ It is forbidden to add diluent during construction.
★ This product should not be painted directly on domestic water supply equipment (including but not limited to water pipes, equipment, mechanical parts, etc.).

Reference dosage
Reference dosage:1mm firm, around 1.5kg/m2 . The actual amount depends on the specific base surface conditions.

Shelf life:
Under normal storage and transportation conditions, the shelf life is two year.

Packaging specifications:
1) Product specifications
20kg one-component (paste) (can open the lid and apply directly)

2) Packaging materials
Packed in metal drum.
 

Detailed Photos

Certifications

Company Profile

Guangdong Huolun Building Materials Technology Development Co., Ltd. is an enterprise engaged in the production and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, thermal insulation coating, soundproofing coating, metal anti-rust paint, and so on. The company is registered in Guangzhou, the capital city of Guangdong Province, with a registered capital of 50 million yuan. It is an industrial and research-oriented enterprise.

Since its establishment, the company has grown from a small enterprise to nearly 120  employees. It has experienced rapid growth in its annual sales volume. In 2019, it successfully became the third investor in Oriental Plastics (Guangdong) Industrial Co., Ltd. Additionally, the company owns an operation center of over 600 square meters in Kaiyun Business Center, and a production plant of nearly 30,000 square meters in Guangzhou. It has also established a distribution center of over 1,000 square meters in Chengdu.

In response to the rapid development of the Chinese economy, 'NBS' waterproof products are meeting the escalating demand for building materials. Following strict technical specifications, quality control, and chemical and concrete laboratory data, the company produces a series of building materials products that adapt to China's complex and changeable climate and are at the forefront internationally. It provides customers with necessary testing and perfect waterproof system solutions. 'NBS' waterproof products have been renowned for their quality and excellent service. Our products are exported to Southeast Asia and the Middle East.

Our company's 'NBS' waterproof products are tailored to meet both domestic needs and international demand, resulting in the production of high-quality, environmentally friendly products. The products cover areas such as construction materials, decoration materials, and waterproof materials. We have developed a series of waterproof products for both interior and exterior walls and provide technical services for waterproofing projects. Relying on the company's high-tech research and development, we have developed a series of waterproof products with world-class performance, all of which meet or exceed national testing standards. The company holds multiple patents for invention and utility models, possesses a second-level waterproof construction qualification, and is a national high-tech enterprise and a nurtured enterprise for small giants. It is a trusted enterprise in the waterproofing industry.

Adhering to the principles of quality first and service excellence, we actively collaborate with both current and new partners, seeking mutual development and a prosperous future.

FAQ

 

1. Q: Are You Factory Or Trading Company?
     A: we are Manufacturer

2. Q: Can You Make Our Design Or Put Our Logo On The Product?
    A: Yes,We support OEM&ODM. We can put your Logo on product.

3. Q: About Sample?
     A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.

4.Q: About Delivery Time?
   A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.

5. Q:Do You Have Discount For Bulk Order?
    A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get

6. Q: Do you provide Technical & Engineering Service?
    A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.