1. Product introduction
This product is a polymer-modified cement-based waterproof material prepared by a unique formula. It is a two-component slurry. The slurry is obtained after mixing powder and additives according to the mixing ratio. It can be applied to the required part and can penetrate into the substrate to form dendritic crystals and block the water molecule channels in the structure. So as to play a waterproof effect.
2. Product details
Product name: NBS K11 universal waterproof coating
Product model: NBS-101
Product form: Two-component, light dark green solid powder + milky white liquid slurry
Executive standard: JC/T2090-2011
3. Product advantages
1) It resists high hydrostatic pressure and has the waterproof function of the back surface; it can be constructed in damp areas; it is easy to operate, and it can be used only by stirring on site.
2) Good abrasion resistance, good adhesion, good air permeability, suitable tile glue can be used to paste various decorative tiles after drying.
3) It is non-toxic and harmless, and can be used in pools and fish ponds.
4. The scope of application
It can be used for indoor and outdoor waterproofing projects of various building structures such as concrete, brick walls, concrete blocks, prefabricated blocks, such as: subway stations, mines, tunnels, elevator shafts, basements, kitchens, toilets, bathrooms, pools, swimming pools , Sewage tank, etc.
5. Construction technology
1)Base preparation
The substrate must be firm, flat, clean, free of dust, greasy, wax, release agent, etc. and other debris;
‚ All small pores and sand holes can be mixed with K11 powder and a little water to form a wet mass, and then smoothed;
ƒ Before applying the slurry, fully moisten the substrate in advance, but there should be no stagnant water.
2) Pour the powder into a container with additives, stir mechanically for 3 minutes until there is no precipitated colloid, and then let it stand for 3-5 minutes, then stir it for use. Intermittent stirring should be maintained during use to prevent precipitation. Use a stiff brush, roller or spray machine to evenly brush or spray the mixed slurry on the wet substrate; layer construction, the second layer should be applied perpendicular to the first layer; the thickness of each layer must not be more than 1mm.
6. Matters needing attention
1) This product is suitable for use in an environment of 5ºC~35ºC, and must be protected from rain, hot sunlight and frost during the construction process.
2) The slurry after opening and adjustment should be used up within 1 hour. Do not mix the dried glue with water before using it.
3) After the waterproof layer is completely dried, other covering layers can be used.
7. Reference dosage
When the thickness of the waterproof membrane is 1.0mm, the theoretical dosage is about 1.5-2.0kg/m2. The actual amount depends on the specific base surface conditions.
8. Shelf life:
Under normal storage and transportation conditions, the shelf life is two years.
9. Packaging specifications:
1) Product specifications
5kg 3.6kg powder + 1.4kg slurry + small package of additives
10kg 7.3kg powder + 2.7kg slurry + small package of additives
20kg 14.6kg powder + 5.4kg slurry + small package of additives
34kg 25kg powder + 9kg slurry + small package of additives
2) Packaging materials
Packed in plastic drums; 34kg group is divided into plastic drums and woven bags.
Guangdong Huolun Building Materials Technology Development Co., Ltd. is an enterprise engaged in the production and sales of waterproof materials and related auxiliary materials for construction. Our main products cover waterproof coating, thermal insulation coating, soundproofing coating, metal anti-rust paint, and so on. The company is registered in Guangzhou, the capital city of Guangdong Province, with a registered capital of 50 million yuan. It is an industrial and research-oriented enterprise.
Since its establishment, the company has grown from a small enterprise to nearly 120 employees. It has experienced rapid growth in its annual sales volume. In 2019, it successfully became the third investor in Oriental Plastics (Guangdong) Industrial Co., Ltd. Additionally, the company owns an operation center of over 600 square meters in Kaiyun Business Center, and a production plant of nearly 30,000 square meters in Guangzhou. It has also established a distribution center of over 1,000 square meters in Chengdu.
In response to the rapid development of the Chinese economy, 'NBS' waterproof products are meeting the escalating demand for building materials. Following strict technical specifications, quality control, and chemical and concrete laboratory data, the company produces a series of building materials products that adapt to China's complex and changeable climate and are at the forefront internationally. It provides customers with necessary testing and perfect waterproof system solutions. 'NBS' waterproof products have been renowned for their quality and excellent service. Our products are exported to Southeast Asia and the Middle East.
Our company's 'NBS' waterproof products are tailored to meet both domestic needs and international demand, resulting in the production of high-quality, environmentally friendly products. The products cover areas such as construction materials, decoration materials, and waterproof materials. We have developed a series of waterproof products for both interior and exterior walls and provide technical services for waterproofing projects. Relying on the company's high-tech research and development, we have developed a series of waterproof products with world-class performance, all of which meet or exceed national testing standards. The company holds multiple patents for invention and utility models, possesses a second-level waterproof construction qualification, and is a national high-tech enterprise and a nurtured enterprise for small giants. It is a trusted enterprise in the waterproofing industry.
Adhering to the principles of quality first and service excellence, we actively collaborate with both current and new partners, seeking mutual development and a prosperous future.
FAQ
1. Q: Are You Factory Or Trading Company?
A: we are Manufacturer
2. Q: Can You Make Our Design Or Put Our Logo On The Product?
A: Yes,We support OEM&ODM. We can put your Logo on product.
3. Q: About Sample?
A:The Sample Need About 5~15 Days, And The Cost With Express Will Be Charged. But Would Be Returned After Place Order.
4.Q: About Delivery Time?
A: It needs about 15-25 Days, Depend On The Quantity. We also supply ready to ship products.
5. Q:Do You Have Discount For Bulk Order?
A:Yes,Of Course,The More You Buy,The Bigger Discount You Can Get
6. Q: Do you provide Technical & Engineering Service?
A: Yes, we specialized in waterproof materials in terms of R&D manufacturing and sales over 10 years, we have Technical support team.
){kind=link}